Dental problems are some of the most common health issues that people have in the modern society. This has been linked to increased civilization and more frequent consumption of foods that are processed and rich in sugars. The oral bacteria utilizes these sugar to cause damage to teeth. Sometimes if the damage is neglected, it can become so massive that the tooth involved may have to be lost. When this happens, there are several ways available by which the missing tooth can be replaced. One of these is by use of dental implants falls church va.
Dental implants are root devices that are manufactured and used to replace missing teeth in the mouth. They are installed inside of bone and allowed to bond to the surrounding tissues. It is a good option to consider when replacing one tooth. This is because the adjacent teeth are not involved and thus remain untouched in their natural form.
Posts can be used to anchor a complete denture to the jaw bone so as to prevent it from coming off unnecessarily. The lower complete dentures are more commonly supported with implants since the lower alveolar bone does not provide good support for the dentures. This is caused by bone loss as one ages.
General patient assessment is crucial before performing any procedure. Through history taking, one can pick out other diseases that the patient is not aware of. Some of these diseases can make the success of implants to reduce by retarding healing. By looking inside the mouth, a dentist can make an assessment of the success rate of the procedure. Feeling the bony tissues by finger pressure is another assessment method. At times, an x ray may be taken to have a better analysis of the bones.
All costs to be charged should be explained to the client. The dentist will only begin work if he is sure that he will be paid.
The post used will depend on the results that the doctor wants to achieve as well as the customer's ability to pay. Different posts are manufactured and vary depending on the material used to make them as well as their form. The surface of different posts also differs.
The actual treatment is done by first raising a flap. When the bone has been exposed, a dental drill is used to make a hole into which the implant will fit. The hole is enlarged in a stepwise manner until it is the right size. The drill should be supplied with water at a constant rate so that heat generated during drilling doesn't damage bone.
The post which has been selected is placed into the hole created and the flap is restored to its initial site and sutured. After adequate healing with proper attachment between the post and bone, a denture or crown can be fitted onto the post.
Dental implants are root devices that are manufactured and used to replace missing teeth in the mouth. They are installed inside of bone and allowed to bond to the surrounding tissues. It is a good option to consider when replacing one tooth. This is because the adjacent teeth are not involved and thus remain untouched in their natural form.
Posts can be used to anchor a complete denture to the jaw bone so as to prevent it from coming off unnecessarily. The lower complete dentures are more commonly supported with implants since the lower alveolar bone does not provide good support for the dentures. This is caused by bone loss as one ages.
General patient assessment is crucial before performing any procedure. Through history taking, one can pick out other diseases that the patient is not aware of. Some of these diseases can make the success of implants to reduce by retarding healing. By looking inside the mouth, a dentist can make an assessment of the success rate of the procedure. Feeling the bony tissues by finger pressure is another assessment method. At times, an x ray may be taken to have a better analysis of the bones.
All costs to be charged should be explained to the client. The dentist will only begin work if he is sure that he will be paid.
The post used will depend on the results that the doctor wants to achieve as well as the customer's ability to pay. Different posts are manufactured and vary depending on the material used to make them as well as their form. The surface of different posts also differs.
The actual treatment is done by first raising a flap. When the bone has been exposed, a dental drill is used to make a hole into which the implant will fit. The hole is enlarged in a stepwise manner until it is the right size. The drill should be supplied with water at a constant rate so that heat generated during drilling doesn't damage bone.
The post which has been selected is placed into the hole created and the flap is restored to its initial site and sutured. After adequate healing with proper attachment between the post and bone, a denture or crown can be fitted onto the post.
0 comments:
Post a Comment